SQ-100 and SQ-150 AUTOMATIC TAP SQUARE GRINDING MACHINES

 

Other Hertlein Square Grinder Models:

SQ75 

 

Features:

Fully Automatic Operation for maximum production with minimum direct labor.
High Production Rates for rapid return on investment.
Enclosed grinding chamber available for a cleaner, quieter environment.
Multi-Flute Feedbox for 2 through 6 flutes.
Automatic Compensating Dresser automatically compensates for amount dressed off the grinding wheel.
Easy Access-three separate major assemblies, all in plain sight, provide the ultimate in easy setup and maintenance.
Versatility-The SQ-100 can be equipped provision to grind one side of the square longer than the three others,
with a maximum variation of 3.2 mm. This identifies tap location for subsequent operations and saves marking or stamping
and eliminating loss of production time.
Choice of Models with either single point or diamond roll, fully automatic self compensating dressing systems.


Specifications: Model SQ-100


Blank Diameter Maximum: 20 mm. Minimum: 1.5 mm.

Blank Length Magazine loaded: 112 mm. Manually loaded: 152 mm.

Grinding Wheel New: 750 mm.

Minimum: 450 mm.

Hole: 304.8 mm.

Width maximum: 25 mm.

Spindle Motor: 15 HP.

Hydraulic Motor: 5 HP.
 

Specifications: Model SQ-150 or SQ-150L

Blank Square Maximum: 32 mm. Minimum: 3.2 mm.

Key Width for Hexagons Maximum: 44 mm.

Blank Length Model S: 407/254 mm. Model L: 660/508 mm.

Grinding Wheel New: 750 mm.

Minimum: 450 mm.

Hole: 304.8 mm.

Width maximum: 64 mm.

Spindle Motor: 30 HP.

Hydraulic Motor: 5 HP.

Index: 2,3,4 and 6.


Normac Home