P600 - NORMAC AUTOMATIC CENTER DRILL POINT GRINDING MACHINE

 

Normac P600

 

Other Centerdrill Grinder Models:

F260 F310 SD60

 

 

Features:

Produces a radially relieved point.
Point angle is easily adjusted by simply loosening 2 clamps and swinging to a new position.
Front axial location is fully adjustable and provides uniform stock removal.
Radial location (timing) provided by carbide ball engaging flute close to the point.
Patented loading system that features load, unload and reload cycle. This insures against any damage occurring to the
ground point during the loading cycle.
Only three main assemblies - designed for easy access, setup and maintenance.
Sturdy compact geared workhead assembly generates optimum drill point geometry.
 

Specifications:

Size Range: .040" to .500" (1 mm to 13 mm) diameter.

Overall Length: to 8" (200 mm). Right and left hand spiral.

Point Angles: 90° to 140°.

Accuracy: Concentricity averages .0001" (.002 mm) to .0004" (.010 mm) T.I.V. and rarely exceeds .0008" (.020 mm) even on warped drills.

Setup Time: Ten to twenty minutes depending on previous drill ground.

Grinding Wheel Size: 10" x 1-1/4" x 1" (250 mm x 31.7 mm x 25 mm) wide. Resin bonded type.

Options: Protective hood.

Normac Home