CP25- NORMAC AUTOMATIC CONE POINT GRINDING MACHINE
Other Point Grinder Models:
SP22 SP77 CP50
For cone point or chamfer grinding chopped drill blanks.
Fully automatic operation.
High production rates.
Size Range: 3/32" to 17/64" (2 mm to 7 mm) diameter.
Maximum Overall Length: 2" to 6-1/2" (50 mm to 165 mm).
Point Angle: 118° or 135°.
Grinding wheel size - Plate-mounted: 12" (300 mm) O.D. x 2-1/2" (63.5 mm) wide x 5" (127 mm) I.D.
NOTE: The CP25 is a roughing operation machine for cone pointing and / or chamfering of chopped drill blanks. It is not intended for, or capable of, precision finishing grinding. Because the CP25 boasts tremendous production rates, it is very maintenance intensive. Nevertheless it still represents the most cost effective and productive method of preparing chopped blanks for automated drill production.